Quicker, easier and safer way to install a Stove

The Stove Box simplifies stove fitting when a stove is required in a recess. This can be chopped into an existing chimney breast or built around, creating a new breast in a room with no chimney. The Stove Box is fixed in position, insulated all around and above reducing any heat loss you would have on a normal conventional install. This results in the stove getting hotter quicker for longer and using less fuel.

When we carried out a test at Kiwa as a comparison between a register plate fit and a Stove Box install, the result was 14% more heat projected forward into the room using a 5Kw stove, burning wood. That is quite considerable on 5kw.

When the Stove Box is in position we make a number of various interiors that are fixed to the box, giving a wide choice of fireplace options available.

The benefits are:

  • • Saves time on site
  • • Wide choice of options on interiors, brick, stone, plaster,etc (these are pre-cut for height)
  • • No need for soot doors, register plates, hatches, and with the special collar enables easy access to above for cleaning, servicing, and connecting to liners and chimney systems.
  • • Adjustable separate collar available for stove pipe 5”and 6” which can move back and forth approx up to 80mm to avoid lintols and line up with clay liners which are already in place (you don’t know where these are till you have chopped out the opening)
  • • These are bolted to the underside of the top and tightened when your fitting is complete.
  • • The Stove Box interior can be changed easy when changing decor at a later date if required.
01
Cut down on your heating costs

The Stove Box has changed stove fitting throughout the UK due to its environmental benefits. It is approved by building control and HETAS. Kiwa, a UKAS-accredited company, carry out testing (and often certification) on appliances, construction materials, electrical and water products.

Easy installation

The Stove Box cannot be fitted without a fire resistant interior included. We have a number of adaptors for connecting the flue liner, patented adjustable collars which bolt on allowing a sliding movement for easy access to above the box for connecting to the liner and for servicing.

New adjustable options

The Stove Box is available in 4 fixed sizes and is supplied flat pack. If depth is a problem the SB1 and SB2 now comes as an adjustable option. The stove box must be fitted to meet building regulations.

We have number of box sizes for all size openings

Rigid SB1, SB2 and SB4 and Blazer

The Stove Box is available in 4 fixed sizes and is supplied flat pack. If depth is a problem the SB1 and SB2 now comes as an adjustable option. The stove box must be fitted to meet building regulations.  The appliance must be fitted by an approved installer and do not fit a stove with a higher kW than suggested. The kW recommendations shown are based on our installations over the last 4 years.

Adjustable SB1 and SB2

Adjustable SB1 - 37”W x 34”H x 14-18”D - (94cm x 86cm x 35-45cm)
Adjustable SB2 - 31”W x 32”H x 12-16”D - (78cm x 81cm x 30-40cm)

02

Lined Interiors 

The finished look on a fireplace feature, depends on the materials you use. Over the years we have added a range of interiors for our Stove Boxes. We can make to order. Interiors options are:

  • • Plain fireboard for painting or tiling
  • • Textured fireboard to paint
  • • Reeded fireboard
  • • Featured brick, various patterns, stone, etc....
03

Screwfix adapters and adjustable collars

We have patented a adjustable collar that seals the flue pipe, which bolts to the top of the Stove Box and slides to the required position and bolts to the flue to give a safe and sturdy install.

These come in 2 sizes for 5"/6" flue pipe and can be used also with our adjustable register plates and the rear sealing plate making sitework servicing stoves easier.

04

Have you got fireplace project in mind?

Let our team of experts take the stress out of finding the right fireplace package for your living space.

Start Now